Ceramic fan heater TDS 10 M
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Heating
  4. Ceramic fan heaters of the TDS-M series
  5. TDS 10 M

Ceramic fan heater TDS 10 M

Quick, effective and draught-free warmth without burning dust

The small ceramic fan heater is not only the ideal heating solution for allergy-sufferers to be used in living and work spaces. For, generally speaking, electric heaters are excellently suited for use in closed interior spaces, as they neither consume oxygen nor produce any combustion gases. The ceramic fan heater TDS 10 M still outweighs this commonly known advantage of electric heaters, for it is equipped with a PTC ceramic heating element instead of heating wires.

Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.

Thanks to the smoothly running fan and the large heater battery surface, you can benefit from a pleasantly homogeneous, draught-free hot air current – which is, moreover, usually produced in a more silent way. As an additional plus in safety, the integrated ceramic heating element also increases the fan heater’s stability.

With its two heating levels that can be set separately, the TDS 10 M can be variably switched to 1 kW or 2 kW heating operation and, in combination with its powerful axial fan, provides pleasant warmth in cold rooms.

Faster air heating – more uniform room temperature

Trotec’s fan heaters with PTC ceramic heating elements (A) not only differ from conventional heating coil technology (B) in terms of their shorter heat-up times. There are also process-related differences in the response behaviour of the heating elements.

Although both devices maintain the preselected target temperature (orange) by means of thermostat control using a two-position controller, the respective temperature adaptation takes place significantly more slowly and with greater deviations from the desired target temperature in case of devices with heating coils. The reason for this is the different conductivity behaviour of the heating elements:

if current flows through the heating coils, the coils will always have the same temperature once they have heated up. For controlling the desired room temperature, the power supply is first interrupted, making the coil cool down, and then re-activated by the thermostat so that the coil heats up again completely before it is switched off again when the set target temperature is reached.

This “on/off process” causes significantly greater temperature fluctuations than with ceramic heating elements, for the material of the latter provides an integrated temperature self-regulation. The hotter PTCs get, the higher is their electrical resistivity, resulting in less current flowing through the heating element and in a reduced heating capacity, and thus in significantly lower temperature fluctuations and less switch-on and switch-off processes in thermostat-controlled operation.

For this reason, ceramic fan heaters are able to create more even room temperatures for temperature-sensitive manufacturing processes as well as a pleasant working climate.

Faster and more even heat with ceramic fan heaters
Faster and more even heat with ceramic fan heaters
Easy-to-handle, ready-for-use solution for quick, effective indoor heat.
Ready for use, easy to handle
The powerful axial fan with its robust metal construction distributes pleasant warmth in cold rooms.
Powerful axial fan
Two heating levels that can be set separately allow for a heat output of either 1 or 2 kW.
Two heating levels
Due to its thermally insulated carrying handle, the TDS 10 M can be easily transported.
Thermally insulated carrying handle

A few practical benefits:

  • Ceramic PTC heater battery instead of conventional filaments
  • Multi-stage temperature control with two heating levels
  • Overheating protection
  • Fan motor with thermal protection
  • Non-condensing warmth without oxygen consumption – ideal for heating interior spaces
  • Stable, robust and silent
  • Easy transport and operation

Benefit from the Trotec brand quality guaranteeing high value, safety and functionality. Via the registered GS mark the inspection authority TÜV Rheinland certifies that, if used foreseeably and as intended, the device does not pose a risk to the health and safety of the user.

TÜV – Tested for safety, TÜV GS ID 1419052803

Technical data by comparison

All Trotec ceramic fan heaters of the TDS-M series by direct comparison:

To find the TDS-M ceramic fan heater which exactly meets your requirements, please consult the concise overview of all devices from Trotec’s TDS-M series, which we’re providing to you here so that you can compare them directly to each other.

Models which you do not wish to include in your comparison can be easily dismissed with only one click.

Technical data by comparison

Practical knowledge guidebook – heating know-how for professional users

Benefit from first-hand manufacturer know-how: On our guidebook pages we’re providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.

Continue to the practical knowledge guidebook for professional heating

Continue directly to the practical knowledge guidebook for professional heating
To the heating capacity calculator

Heat requirement calculation

In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.

To the heating capacity calculator

Buy

Keramik-Heizlüfter TDS 10 M show in Trotec online shop

Keramik-Heizlüfter TDS 10 M

You save: 37 %

39.95 € 24.95 € incl. VAT Show net price (VAT not included)

buy

Technical data

Technical data
General information
  Article number 1.410.000.050
Heating capacity
  Level 1 [kW] 1
  Level 2 [kW] 2
  Level 3 [kW]
  Level 4 [kW]
  Level Max. [kcal] 1,720
Air flow rate
  Level Max. [m³/h] 100
Temperature increase
  in [°C] 95
Operating range
  Min. temperature [°C] -15
  Max. temperature [°C] 30
Fans
  axial
  Radial
  Number of fan stages 1
Electrical values
  Mains connection 220 - 240 V/50 Hz
  Nominal current consumption [A] 8.69
  Recommended fusing [A] 10
  Power input [kW] 2
Electric connection
  Connection plug CEE 7/7
  Provided by the customer
  Cable length [m] 1.35
Sound values
  Distance 1 m [dB(A)] 52
Dimensions
  Length (packaging excluded) [mm] 130
  Width (packaging excluded) [mm] 165
  Height (packaging excluded) [mm] 225
Weight
  (packaging excluded) [kg] 1.54
Equipment, features and functions
Operation
  Internal thermostat
  Thermostat
Mobility
  Carry/transport handle(s)
  Plastic wheels
  Rubber-tyred metal wheels
  Non-marking full-rubber wheels
Housing design
  Metal

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...

Brochures

Loading...