Ceramic fan heater TDS 10 C from Trotec

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Heating
  4. Ceramic fan heaters of the TDS-C series
  5. TDS 10 C

Ceramic fan heater TDS 10 C

Small, but impressive – and ardently sought-after by tough calculators

Tested for safety, TÜV GS ID 1419075192

So much hot temper in such a compact, robust and easily portable construction? It is hard to believe, but made possible by Trotec, as one can immediately recognize from the brand logo imprinted on the outside of this electric heater painted in signal red.

Its excellent workmanship, the transport-friendly dimensions and a sophisticated heating technology make the TDS 10 C an indispensable heating device for assembly work, workshops, market stalls, construction trailers and other cold rooms.

Ceramic fan heater TDS 10 C

For unlike conventional electric heating devices, the TDS 10 C uses an advanced PTC ceramic heating element for heating the air. Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.

Thanks to the smoothly running fan and the large heater battery surface, you can benefit from a pleasantly homogeneous, draught-free hot air current – which is, moreover, usually produced in a more silent way. As an additional plus in safety, the integrated ceramic heating element also increases the fan heater's stability.

With its two heating levels that can be set separately, the TDS 10 C can be variably switched to 1 kW or 2 kW heating operation and, in combination with its powerful axial fan, provides pleasant warmth in cold rooms.

The desired temperature can be regulated as needed via the integrated infinitely variable thermostat of the TDS 10 C. If required, the fan can also be used in sole fan operation without heating function.

Optional wall and ceiling holder

Practical tip: Instead of positioning it on the floor, you can also flexibly mount the TDS 10 C to a wall or ceiling. For as it leaves the factory, this electric heater is already fitted with two fastening threads mounted to the sides that serve to accommodate the optionally available wall and ceiling holders.

A few practical benefits:

  • Development, design, production: 100 % Trotec
  • Durable ceramic PTC heater battery
  • Multi-stage temperature control with two heating levels plus separate cold air level
  • Integrated thermostat for a constant warm air flow
  • Overheating protection
  • Fan motor with thermal protection
  • Non-condensing warmth without oxygen consumption – ideal for heating interior spaces
  • Robust metal housing in signal red
  • Stable, robust and silent
  • Easy transport and operation

Special features:

  • Fastening preparation for wall and ceiling mounting
  • Controllers recessed for protection
Two heating levels provide a heat output of either 1 or 2 kW in thermostat-controlled automatic operation, while the cold air level additionally allows for ventilation without heating.
Multi-stage temperature control with two heating levels
Faster and more even heat with ceramic fan heaters

Faster air heating – more uniform room temperature

Trotec’s fan heaters with PTC ceramic heating elements (A) not only differ from conventional heating coil technology (B) in terms of their shorter heat-up times. There are also process-related differences in the response behaviour of the heating elements.

Although both devices maintain the preselected target temperature (orange) by means of thermostat control using a two-position controller, the respective temperature adaptation takes place significantly more slowly and with greater deviations from the desired target temperature in case of devices with heating coils. The reason for this is the different conductivity behaviour of the heating elements:

if current flows through the heating coils, the coils will always have the same temperature once they have heated up. For controlling the desired room temperature, the power supply is first interrupted, making the coil cool down, and then re-activated by the thermostat so that the coil heats up again completely before it is switched off again when the set target temperature is reached.

This "on/off process" causes significantly greater temperature fluctuations than with ceramic heating elements, for the material of the latter provides an integrated temperature self-regulation. The hotter PTCs get, the higher is their electrical resistivity, resulting in less current flowing through the heating element and in a reduced heating capacity, and thus in significantly lower temperature fluctuations and less switch-on and switch-off processes in thermostat-controlled operation.

For this reason, ceramic fan heaters are able to create more even room temperatures for temperature-sensitive manufacturing processes as well as a pleasant working climate.


The TDS 10 C is an easy-to-handle, ready-to-plug-in solution for quick, effective indoor heat without burning dust.
Effective, easy-to-handle heating solution
Compact, lightweight construction with a low centre of gravity ensuring optimum stability – plus simple transport thanks to the thermally insulated carrying handle.
Compact and stable
The high-performance axial fan with its robust metal construction distributes pleasant warmth in cold rooms.
Powerful, robust axial fan

Practical knowledge guidebook – heating know-how for professional users

Benefit from first-hand manufacturer know-how: On our guidebook pages we’re providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.

Continue to the practical knowledge guidebook for professional heating

Continue directly to the practical knowledge guidebook for professional heating
To the heating capacity calculator

Heat requirement calculation

In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.

To the heating capacity calculator

Buy

Keramik-Heizlüfter TDS 10 C im Trotec Webshop zeigen

Keramik-Heizlüfter TDS 10 C

Als praktisch überall einsetzbare, optimale Wärmelösung entpuppt sich der mobile Keramik-Heizlüfter TDS 10 C. Mit einer maximalen Heizleistung von 2 kW verteilt der rote Heizer staubfrei Wärme in kleineren Innenräumen oder Werkstätten sowie Garagen.

Sie sparen: 12 %

39.95 € 34.95 € inkl. MwSt. Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Technical data

Technical data
General information
  Article number 1.410.000.090
Heating capacity
  Level 1 [kW] 0
  Level 2 [kW] 1
  Level 3 [kW] 2
Air flow rate
  Level Max. [m³/h] 140
Temperature increase
  in [°C] 151
Operating range
  Min. temperature [°C] -15
  Max. temperature [°C] 25
Fans
  axial
  Radial
  Number of fan stages 1
Electrical values
  Mains connection 220 - 240 V/50 Hz
  Nominal current consumption [A] 8.7
  Recommended fusing [A] 10
  Power input [kW] 2
Electric connection
  Connection plug CEE 7/7
  Cable length [m] 1.3
Sound values
  Distance 1 m [dB(A)] 52
Safety feature
  IP type of protection IP20
Hose connection
  Hose connection
Dimensions
  Length (packaging excluded) [mm] 165
  Width (packaging excluded) [mm] 165
  Height (packaging excluded) [mm] 225
Weight
  (packaging excluded) [kg] 2
Equipment, features and functions
Operation
  Thermostat
  Fan function
  Temperature control with two heating levels
Mobility
  Ceiling holder
  Wall holder TDS 10/20/30
  Carry/transport handle(s)
  Plastic wheels
  Rubber-tyred metal wheels

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...

Brochures

Loading...