Customer Service & Support: +49 2452 962-450

Business inquiries: +49 2452 962-400

Mon – Fri: 8:00 – 17:00 (CET)

Gas heater fans of the TGH-E series
Gas heater fans of the TGH-E series
Gas heater fans of the TGH-E series
  1. Products & Services
  2. Products ‑ HighPerformance
  3. Heating
  4. Gas heater fans of the TGH-E series

Gas heater fans of the TGH-E series

Budget-friendly instant heat produced by a heating capacity of up to 30 kW

Gas heater fans of the TGH-E series

The TGH-E series: a good choice, it is safe to say

These robust branded gas heater fans not only impress with their outstanding value-for-money ratio, it goes without saying that safety is also a major priority with these propane heaters:

An integrated temperature sensor serves as flame failure protection and prevents the emission of unburnt gas. Moreover, the standard equipment includes a safety thermostat for overheating protection which automatically interrupts the gas supply in case of overheating while the fan continues to run to ensure the necessary cooling. The specially shaped discharge grille of the TGH-E models prevents direct contact with the flame whilst ensuring an optimally swirled, high-volume current of warm air. Last but not least, the thermally insulated transport handle permits the safe and simple transportation to the next operating site where – thanks to additionally fitted slip-proof rubber feet – the gas heater fan can be set up safely. Owing to their extremely compact design, the heating devices can easily be transported even in the smallest of car boots.

Since connection hose and pressure reducer for connecting the gas cylinder are already included in the scope of delivery of each gas heating device, nothing more than a socket and a propane cylinder is required for the heating operation. The long connection cable increases your flexibility in selecting the installation site. Once in operation, agreeable warmth begins to spread immediately, seeing as the integrated turbo blower ensures an effective air flow made up of sucked in ambient air and blown out warm air. Even larger rooms can quickly be heated in this manner.

For instance, you can use the gas heater fans of the TGH-E series for mobile spot heating of well-ventilated construction sites, workshops, storage spaces, garages, stables, greenhouses or else roofed outdoor areas, tents and marquees. Rough operating conditions hardly matter to these heating devices, for they come with a hard-wearing, robust metal construction including space heater in powder-coated corrugated sheet metal design.

Important information about direct gas heaters

Gas heaters are recommended for use in well-ventilated indoor and covered outdoor areas, where all the heat developed is actually available (100 % output).

Important:

In addition to heat, gas fan heaters also emit combustion exhaust gases directly into the room. They are therefore unsuitable for closed rooms without good ventilation if people or animals are present in them.

In addition, approx. 1.6 kg of water vapour is produced per litre of fuel during combustion. Direct gas heaters are therefore not suitable for drying buildings. If gas heaters were used to dry out buildings, the worst that could happen would be that the building would be damper than before!

Gas heaters must also not be used in rooms at risk of fire, e.g. due to the storage of flammable materials.

Good to know: Gas heater fans …

  • are suited for the use in well-ventilated interior spaces and roofed outdoor areas
  • generate a heating capacity of 100%
  • emit combustion waste gases directly into the room along with the heated air
  • are not suitable for the use in closed rooms
  • cannot be used for construction drying, since the combustion generates approx. 1.6 kg of water vapour per litre of fuel
  • must not be used in rooms with a fire hazard due to the storage of flammable substances
The gas-fired direct heaters of the TGH-E series suck in the ambient air through a turbo blower, then heat the main air current using a gas burner and finally discharge the heated air to the room.
Direct heaters for instant heating

Make sure you are on the safe side by using gas heater fans of the TGH-E series

  • Thanks to the integrated temperature sensor the flame failure protection prevents the emission of unburnt gas.
  • The overheating protection makes use of a safety thermostat that is included in the standard equipment to automatically interrupt the gas supply in case of overheating while the fan continues to run to ensure the necessary cooling.
  • The specially shaped discharge grille of the TGH-E models prevents direct contact with the flame whilst ensuring an optimally swirled, high-volume current of warm air.
  • The thermally insulated transport handle permits the safe and simple transportation to the next operating site where – thanks to additionally fitted slip-proof rubber feet – the gas heater fan can be set up safely.

When it comes to affordable instant heat for construction sites, workshops, stables or greenhouses, there is practically no other way than using a gas heating device. For gas is a low-priced energy source – and combined with the inexpensive heater fans of the TGH-E series it makes for one of the most economic and simultaneously effective instant heating solutions.

Gas heater fans of the TGH-E series

The TGH-E series can supply an appropriate heating capacity for every demand

With respect to varying room sizes and the corresponding heating demand, the TGH-E series certainly holds a suitable gas heater fan for all individual requirements:

  • for rooms sized up to 100 m³: gas heater fan TGH 11 E with a heating capacity of up to 10 kW,
  • for rooms sized up to 150 m³: gas heater fan TGH 15 E with a heating capacity of up to 15 kW,
  • for rooms sized up to 300 m³: gas heater fan TGH 30 E with a heating capacity of up to 30 kW.

A few practical benefits:

  • Mobile propane heater fans with
    a heating capacity of up to 30 kW
  • Thermostatic and sensor-controlled
    safety devices for maximum protection
  • Individual buttons for gas flow and piezo ignition to prevent unintentional activation
  • Hard-wearing,
    robust metal construction
  • Thermally insulated carrying handle
  • Space heater in powder-coated corrugated sheet metal design
  • Secure footing due to slip-proof rubber feet
  • Turbo blower for a maximum
    of hot air current
  • Fan operation also possible
    without heating function
  • Pressure reducer and gas line already
    included in the scope of delivery
To the capacity calculator heating

Heat requirement calculation

In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.

To the heating capacity calculator

 standard equipment

 optionally available

 not available