Electric heater fan TDS 50 E

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450
  1. Products & Services
  2. Machines - HighPerformance
  3. Heating
  4. Electric heater fans of the TDS-E series
  5. TDS 50 E

Electric heater fan TDS 50 E

Powerful mobile heating in a trice

Tested for safety, TÜV GS ID 1419041059

The robust electric heater fan TDS 50 E is the powerful heating solution for the building industry and agricultural sector, for the catering trade or holiday home.

With its hard-wearing double-walled housing, the TDS 50 E is on the one hand flexibly prepared for different operating conditions, and on the other hand offers good thermal insulation. Designed for a mobile change of location, the heating device can be transported conveniently using the practical carrying handle.

Unlike directly fired gas or oil heating devices, the electric heater fan neither consumes oxygen nor produces combustion gases. Therefore, it can be used basically everywhere provided there is a socket – particularly for temperature control in unheated rooms.

Via the integrated thermostat control of the TDS 50 E, the generated warm air current can be infinitely adjusted to the desired temperature in a trice and regulated as needed using the two-stage power control for space-filling temperature control. Beyond that, fan operation without heating function is also possible.

The TDS 50 E is moreover fitted with an integrated cable connection including a cable of approx. 1 m length for direct use, with an effective thermal protection for the fan motor, which can also be used in fan mode without heating function, and with a reliable overheating protection. On top of that, a fan rundown function makes sure that when the device is switched off the heating elements switch off immediately while the fan continues to run for a certain time to cool down the components of the heating device.

Control panel for setting the fan function and two heating levels as well as the infinitely adjustable thermostat
TDS 50 E control panel
The hard-wearing double-walled housing is already equipped with a cable of approx. 1 m length
TDS 50 E front view
Rear view with control panel
TDS 50 E rear view

A few practical benefits:

  • Temperature control with two heating levels
  • Integrated thermostat for a
    constant warm air flow
  • Fan function
  • Hard-wearing double-walled housing with good thermal insulation
  • Overheating protection
  • Fan motor with thermal protection
  • Fan rundown function for cooling down the components
  • Non-condensing heat – no oxygen consumption – thus ideally suited for heating interior spaces
  • Easy transport and operation
TDS 50 E
TDS 50 E

Practical knowledge guidebook – heating know-how for professional users

Benefit from first-hand manufacturer know-how: On our guidebook pages we're providing you with some detailed information regarding the different types of heaters including a functional description, focuses of application and lots more.

Continue to the practical knowledge guidebook for professional heating

Continue directly to the practical knowledge guidebook for professional heating
To the heating capacity calculator

Heat requirement calculation

In a few steps to the matching heating capacity. Calculate the heat demand required for heating our rooms – with our practical online calculator.

To the heating capacity calculator

Shop

Technical data

Technical data
General information
  Article number 1.410.000.087
Heating capacity
  Level 1 [kW] 0
  Level 2 [kW] 4.5
  Level 3 [kW] 9
Air flow rate
  Level Max. [m³/h] 845
Temperature increase
  in [°C] 150
Operating range
  Min. temperature [°C] -20
  Max. temperature [°C] 45
Fans
  axial
  Number of fan stages 1
Electrical values
  Mains connection 400 V/50 Hz
  Nominal current consumption [A] 13
  Recommended fusing [A] 16
  Power input [kW] 9
Electric connection
  Connection plug CEE 16 A, 5-pin
  Provided by the customer
  Cable length [m] 1.3
Sound values
  Distance 1 m [dB(A)] 55
Safety feature
  IP type of protection IPX4
Hose connection
  Hose connection
Dimensions
  Length (packaging excluded) [mm] 390
  Width (packaging excluded) [mm] 300
  Height (packaging excluded) [mm] 430
Weight
  (packaging excluded) [kg] 10
Equipment, features and functions
Operation
  Thermostat
  Temperature control with two heating levels
  Integrated thermostat for a constant warm air flow
  Fan motor with thermal protection
  Fan rundown function
  Fan function
Mobility
  Carry/transport handle(s)
  Feet
  Plastic wheels
  Rubber-tyred metal wheels

 standard equipment

 optionally available

 not available

Accessories

Loading...

Alternative products

Loading...

Downloads

Loading...