Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450
  1. Products & Services
  2. Measuring devices
  3. Multifunction
  4. T3000
  5. SDI sensors
  6. Climate sensors

SDI sensors for climate measuring

T3000 display climate measurement

All SDI climate sensors allow to accurately measure air temperature, dew point temperature, mixing ratio as well as relative and absolute humidity.

During measurement, air temperature, humidity and dew point temperature values can be simultaneously shown in real time on the T3000 display.

Minimum, maximum, average and “hold” values can be displayed optionally in addition to these three measured values at the bottom of the display.

Thanks to the integrated logger function of the T3000 you can also conduct 5-, 10-, 30- or 60-minute non-stop measurements while recording all climate values.

Critical dew point
Critical dew point

Critical dew point

Practice-oriented measurement parameter to contain damages caused by moisture or mould

Condensation of air moisture on objects with surface temperatures close to or below dew point encourages mould growth in the extreme.

Yet, critical climate conditions conducive to the formation of mould already prevail long before reaching the dew point. ­

Hence the T3000 comes equipped with not only a dew point recognition but also with a measuring function to determine the "critical dew point". It defines the temperature which with respect to a specific humidity level (70, 75 and 80 % RH preselectable) is to be regarded as critical for mould formation.

Especially for the damage analysis in environments with otherwise inconspicuous room climate values it is important to know the critical dew point, e.g. for measurements behind picture frames, closets or wardrobes.

T3000 sensors for climate measuring
Room climate measurements using the T3000

Climate sensor TS 210 SDI

TS 210 SDI Klimasensor im Trotec Webshop zeigen

TS 210 SDI Klimasensor

Sensor zur Messung von Lufttemperatur und Luftfeuchte. Ermittelt werden relative Feuchte (r.H.), absolute Feuchte (g/m³), Lufttemperatur (°C, °F) und Taupunkttemperatur (dp °C, dp °F).

208.25 € inkl. MwSt.
Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Technical data
General information
  Article number 3.510.220.210
Air temperature [°C]
  Min. measuring range [°C] -20
  Max. measuring range [°C] 50
  Resolution [°C] 0.1
  Accuracy ± -10 °C - 50 °C [°C] 0.4
  Accuracy ± -20 °C - -10 °C [°C] 0.5
  Measuring principle NTC
Humidity [%]
  Min. measuring range [%] 0
  Max. measuring range [%] 95
  Resolution [%] 0.1
  Accuracy 0 % - 90 % [%] 2
  Accuracy 90 % - 100 % [%] 3
  Measuring principle Capacitive
Interfaces / plug design
  Plug design SDI connector
Dimensions of sensor element
  Length [mm] 108
  Diameter [mm] 12
Material of sensor element
  Polycarbonate
  Aluminium
  Stainless steel
  Composite
  Other
Material of handle
  Material Plastic
  Plastic/metal
  Metal
Ascertainable measured values and functions
Internal sensors
  Dew point temperature [°F]
  Absolute humidity content [g/m³]
  Air temperature [°C]
  Air temperature [°F]
  Relative humidity [%]
  Dew point temperature [°C]
  Mixing ratio [g/kg]
Functions and features
  Stainless steel probe
  High-temperature resistant (briefly to up to 180°C!)
  Metal grid filter (gauze) for sensor protection
  Suitable for cleanrooms
  Teflon filter for sensor protection

 Serienausstattung

 optional erhältlich

 nicht verfügbar

Climate sensor TS 230 SDI

TS 230 SDI Klimasensor im Trotec Webshop zeigen

TS 230 SDI Klimasensor

Dank einer Länge von 250 mm und 12 mm Durchmesser können mit diesem Klimasensor auch schwer zugängliche Stellen erreicht und angemessen untersucht werden. Natürlich profitieren Sie auch bei diesem Modell von allen gewohnten Vorteilen wie einer hohen Messwertgenauigkeit und -auflösung.

636.65 € inkl. MwSt.
Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Technical data
General information
  Article number 3.510.220.220
Air temperature [°C]
  Min. measuring range [°C] -40
  Max. measuring range [°C] 140
  Max. measuring range briefly [°C] 180
  Resolution [°C] 0.1
  Accuracy ± -40 °C - 140 °C [°C] 0.7
  Measuring principle PT100
Humidity [%]
  Min. measuring range [%] 0
  Max. measuring range [%] 100
  Resolution [%] 0.1
  Accuracy 0 % - 90 % [%] 2
  Accuracy 90 % - 100 % [%] 3
  Measuring principle Capacitive
Interfaces / plug design
  Plug design SDI connector
Dimensions of sensor element
  Length [mm] 250
  Diameter [mm] 12
Material of sensor element
  Stainless steel
  Aluminium
  Composite
  Polycarbonate
  Other
Material of handle
  Material Plastic
  Plastic/metal
  Metal
Ascertainable measured values and functions
Internal sensors
  Dew point temperature [°F]
  Absolute humidity content [g/m³]
  Air temperature [°C]
  Air temperature [°F]
  Relative humidity [%]
  Dew point temperature [°C]
  Mixing ratio [g/kg]
Functions and features
  Stainless steel probe
  High-temperature resistant (briefly to up to 180°C!)
  Metal grid filter (gauze) for sensor protection
  Suitable for cleanrooms
  Teflon filter for sensor protection

 Serienausstattung

 optional erhältlich

 nicht verfügbar

Climate sensor TS 250 SDI

TS 250 SDI Klimasensor im Trotec Webshop zeigen

TS 250 SDI Klimasensor

Dank einer Länge von 250 mm und nur 5 mm Durchmesser können mit diesem Klimasensor auch schwer zugängliche Stellen erreicht und angemessen untersucht werden. Natürlich profitieren Sie auch bei diesem Modell von allen gewohnten Vorteilen wie einer hohen Messwertgenauigkeit und -auflösung.

493.85 € inkl. MwSt.
Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Technical data
General information
  Article number 3.510.220.235
Air temperature [°C]
  Min. measuring range [°C] -40
  Max. measuring range [°C] 100
  Resolution [°C] 0.1
  Accuracy ± -40 °C - 100 °C [°C] 0.7
  Measuring principle PT100
Humidity [%]
  Min. measuring range [%] 0
  Max. measuring range [%] 100
  Resolution [%] 0.1
  Accuracy ± [% r.F.] 2
Interfaces / plug design
  Plug design SDI connector
Dimensions of sensor element
  Length [mm] 250
  Diameter [mm] 5
Material of sensor element
  Stainless steel
  Aluminium
  Composite
  Polycarbonate
  Other
Material of handle
  Material Plastic
  Plastic/metal
  Metal
Ascertainable measured values and functions
Internal sensors
  Dew point temperature [°F]
  Absolute humidity content [g/m³]
  Air temperature [°C]
  Air temperature [°F]
  Relative humidity [%]
  Dew point temperature [°C]
  Mixing ratio [g/kg]
Functions and features
  Stainless steel probe
  High-temperature resistant (briefly to up to 180°C!)
  Metal grid filter (gauze) for sensor protection
  Suitable for cleanrooms
  Teflon filter for sensor protection

 Serienausstattung

 optional erhältlich

 nicht verfügbar