Ceramic fan heater TDS 50 M from Trotec

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450
  1. Products & Services
  2. Machines - HighPerformance
  3. Heating
  4. Ceramic fan heaters of the TDS-M series
  5. TDS 50 M

Ceramic fan heater TDS 50 M

Quick, effective and draught-free warmth without burning dust

Due to its high air flow rate and advanced PTC heater battery technology, the high-performance rapid heater TDS 50 M is ideally suited for quickly heating large, cold rooms.

TÜV – Tested for safety, TÜV GS ID 1419046531

Whether for use in a workshop, in living or working spaces – the combination of a robust construction, sound workmanship and discreet design harmoniously integrates in any environment, and the thermally insulated carrying handle makes the device quick and easy to transport.

The desired temperature can be regulated as needed via the integrated infinitely variable thermostat of the TDS 50 M. For more targeted warmth, the heating capacity can be increased in two stages up to 9 kW. If required, the fan can also be used in sole fan operation without heating function.

Ceramic fan heater TDS 50 M

The TDS 50 M is powered by three-phase current, which is, however, not supplied to a conventional heating coil but to a durable PTC ceramic heating element integrated in this electric heater. In direct comparison, this does not only entail a more homogenous hot air current and a lower noise generation – the ceramic PTC heater battery also offers many additional assets:

PTC ceramic heating elements are more durable and robust than devices with heating wires or coils. Furthermore, PTC heater batteries independently regulate the power input depending on the ambient temperature and are thus automatically protected against overheating. For this reason, PTC heater batteries do not require a large air supply for cooling, which allows for installation of more smoothly running and hence silent fans.

In combination with the large heater battery surface, TDS-M fan heaters therefore generate a pleasantly homogeneous, draught-free hot air current in a silent way. Moreover, no dust is burnt using this technology, which is why the room air is not contaminated with additional fine particulates – ideal for use in inhabited rooms.

Safe heating operation even in continuous mode does not pose a problem for the TDS 50 M: it has an integrated overheating protection and a fan motor that is equipped with a thermal protection and automatic rundown function, keeping the fan in operation for a certain period of time after switch-off to ensure safe cool-down. As an additional plus in safety, the integrated ceramic heating elements furthermore increase the fan heater's stability.

A few practical benefits:

  • Branded heating device in TÜV-tested quality
  • Durable ceramic PTC heater battery
  • Multi-stage temperature control with two heating levels plus separate cold air level
  • Integrated thermostat for a constant warm air flow
  • Overheating protection
  • Fan motor with thermal protection
  • Fan rundown function for cooling down the components
  • Non-condensing warmth without oxygen consumption – ideal for heating interior spaces
  • Connection cable already integrated
  • Stable, robust and silent
  • Easy transport and operation
Two heating levels provide a heat output of either 6 or 9 kW in thermostat-controlled automatic operation, whereas the cold air level additionally allows for ventilation without heating.
Multi-stage temperature control with two heating levels
Faster and more even heat with ceramic fan heaters

Faster air heating – more uniform room temperature

Trotec’s fan heaters with PTC ceramic heating elements (A) not only differ from conventional heating coil technology (B) in terms of their shorter heat-up times. There are also process-related differences in the response behaviour of the heating elements.

Although both devices maintain the preselected target temperature (orange) by means of thermostat control using a two-position controller, the respective temperature adaptation takes place significantly more slowly and with greater deviations from the desired target temperature in case of devices with heating coils. The reason for this is the different conductivity behaviour of the heating elements:

if current flows through the heating coils, the coils will always have the same temperature once they have heated up. For controlling the desired room temperature, the power supply is first interrupted, making the coil cool down, and then re-activated by the thermostat so that the coil heats up again completely before it is switched off again when the set target temperature is reached.

This "on/off process" causes significantly greater temperature fluctuations than with ceramic heating elements, for the material of the latter provides an integrated temperature self-regulation. The hotter PTCs get, the higher is their electrical resistivity, resulting in less current flowing through the heating element and in a reduced heating capacity, and thus in significantly lower temperature fluctuations and less switch-on and switch-off processes in thermostat-controlled operation.

For this reason, ceramic fan heaters are able to create more even room temperatures for temperature-sensitive manufacturing processes as well as a pleasant working climate.

Powerful heating solution using three-phase current. Delivered ready for use with a 16 A plug for three-phase sockets.
Effective, easy-to-handle heating solution
The high-performance axial fan with its robust metal construction distributes pleasant warmth in large, cold rooms.
Powerful, robust axial fan
Due to its thermally insulated carrying handle, the TDS 50 M can be easily transported.
Thermally insulated carrying handle


Keramik-Heizlüfter TDS 50 M im Trotec Webshop zeigen

Keramik-Heizlüfter TDS 50 M

Aufgrund seiner hohen Luftleistung und fortschrittlicher PTC-Heizregistertechnik eignet sich der TDS 50 M optimal zur zügigen Erwärmung großer, kühler Räume. Die Temperatur kann stufenlos über das integrierte Thermostat dosiert werden. Die Heizleistung lässt sich in 2 Stufen bis auf 9 kW erhöhen.

Sie sparen: 99.99 €

169.94 € 69.95 € inkl. MwSt.
Nettopreis exkl. MwSt. anzeigen

jetzt kaufen


Technical data
General information
  Article number 1.410.000.056
Heating capacity
  Stage 1 [kW] 0.08
  Stage 2 [kW] 6
  Stage 3 [kW] 9
Amount of air
  Stage Max. [m³/h] 1,180
Operating range
  Min. temperature [°C] -15
  Max. temperature [°C] 30
  Number of fan stages 1
Electrical values
  Mains connection 380 - 400 V/50 Hz
  Nominal current consumption [A] 13.7
  Recommended fusing [A] 16
  Power input [kW] 9
Electric connection
  Connection plug CEE 16 A, 5-pin
  Cable length [m] 1.15
Sound values
  Distance 1 m [dB(A)] 53
Hose connector
  Hose connection
  Length (packaging excluded) [mm] 347
  Width (packaging excluded) [mm] 267
  Height (packaging excluded) [mm] 455
  (packaging excluded) [kg] 7
Equipment, features and functions
  Internal thermostat
  Carry/transport handle(s)


 optional erhältlich

 nicht verfügbar


Profi-Verlängerungskabel 20 m / 400 V / 2,5 mm² (CEE 16 A) - Made in Germany im Trotec Webshop zeigen

Profi-Verlängerungskabel 20 m / 400 V / 2,5 mm² (CEE 16 A) - Made in Germany

Das unverzichtbare Zubehör für Ölheizer, Bautrockner, Windmaschinen uvm.: Profi-Verlängerungskabel mit einer Länge von 20 m und einer Anschlussspannung von 400 V. Und das komplett „Made in Germany“!

64.95 € inkl. MwSt.
Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Alternative products

TDS 50 M mit alternativen Produkten vergleichen:

Vergleich starten
Elektroheizer TDS 50 im Trotec Webshop zeigen

Elektroheizer TDS 50

Die TDS-Elektroheizgebläse vereinen solide Technik in einer budgetoptimierten Lösung mit Fokus auf vorwiegend längeren stationären Beheizungseinsätzen. Der Elektroheizer TDS 50 überzeugt durch seine Heizleistung von maximal 9 kW (7.740 kcal), bei einer ausgestoßenen Luftmenge von 708 m³/h.

Sie sparen: 109.99 €

179.94 € 69.95 € inkl. MwSt.
Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Elektroheizer TDS 50 R im Trotec Webshop zeigen

Elektroheizer TDS 50 R

Der formschöne Elektroheizer TDS 50 R mit einer maximalen Heizleistung von 9 kW eignet sich hervorragend zur einfachen, kondensatfreien Warmluftbeheizung von kleineren Innenräumen, Werkstätten oder Garagen.

Sie sparen: 109.99 €

179.94 € 69.95 € inkl. MwSt.
Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Elektroheizgebläse TDS 50 E im Trotec Webshop zeigen

Elektroheizgebläse TDS 50 E

Das robuste Elektroheizgebläse TDS 50 E ( 9 kW) ist die leistungsstarke Wärmelösung für Baugewerbe und Landwirtschaft, die Gastronomie oder das Ferienhaus.

Sie sparen: 109.99 €

179.94 € 69.95 € inkl. MwSt.
Nettopreis exkl. MwSt. anzeigen

jetzt kaufen