Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450

Mobile condenser dryer TTK 800

The "eager beaver"...

The outline is just as distinctive as its robustness, reliability and performance – not for nothing the construction base of the TTK 800 belongs to the top-selling professional construction dryers with the most stable value retention all over Europe and undisputedly defines the standards in professional construction drying for thousands of rental and building companies at home and abroad.

Owing to a perfect combination of an especially powerful and efficient rotation compressor, an utterly robust high-pressure radial fan as well as high-quality electronic and mechanical components, the TTK 800 achieves unprecedented dehumidification capacities, especially at low ambient temperatures.

Between applications the TTK 800 can be easily maintained, transported and stored in every position – vertically or horizontally – thanks to its service-optimized construction.

The TTK 800 as standard comes with an operating hours counter and can optionally be equipped with a hygrostat and a fully automatic condensate pump for continuous operation.

The flow fins and the high-pressure radial fan of the TTK 800 enable an increased distribution of dry air in the room running parallel to the floor.The flow fins and the high-pressure radial fan of the TTK 800 enable an increased distribution of dry air in the room running parallel to the floor.



Investment protection for your drying devices

Particularly during construction drying operations in summer or when drying water damages, it is very likely that climate conditions arise which may significantly shorten the lifetime of condenser dryers – regardless of the make. We as manufacturer care about the fact that for process-related reasons your condenser dryers often have to be replaced much too soon, hence we have prepared a valuable practical recommendation relating to the investment protection of your drying devices. Click here to find out more ...

Performance characteristics TTK 800

  • High dehumidification performance – also at temperatures below 15 °C
  • Suitable for rooms sized up to 800 m³ for construction drying and water damage restoration
  • Dry keeping of rooms sized up to 1,600 m³
  • Usable from 0 °C
  • Powerful rotation compressor
  • Service-optimized construction for quick cleaning and inspections
  • Increased air flow rate due to enormously robust high-pressure radial fan
  • Flow fins for a homogenous distribution of dry air in the room
  • Hot gas automatic defrost system
  • Virtually indestructible steel sheet construction
  • High value retention of the TTK pro series
  • Portable in every position – vertical or horizontal – thanks to TTK compressor technology
  • Easily exchangeable and washable air filter

As optional accessory a fully automatic condensate pump is available for the continuous operation of the TTK 800.



Technical data
General information
  Article number
Dehumidification performance
  At 20 °C / 60 % RH [l/24h] 55
  At 30 °C / 80 % RH [l/24h] 110
  Max. [l/24h] 150
Amount of air
  Max. air volume [m³/h] 940
Recommended room size construction drying
Recommended room size dry keeping
Surrounding conditions
  Min. temperature range [°C] 0
  Max. temperature range [°C] 40
  Min. humidity range [% RH] 35
  Max. humidity range [% RH] 100
Electrical values
  Mains connection 230 V/50 Hz
  Power input [kW] 2.4
  Nominal current consumption [A] 11.4
  Recommended fusing [A] 16
  Required current starting phase [A] 37
  Rotary piston compressor
  Reciprocating piston compressor
  Type of cooling agent R-407C
  Amount of cooling agent [g] 720
  GWP factor 1,774
  CO2 equivalent [t] 1.277
  Suction Side pressure [MPa] 0.7
  Discharge Side Pressure [MPa] 2.7
Water tank
  Contents in [Litres]
Sound values
  Distance 1 m [dB(A)] 63
  Distance 3 m [dB(A)] 60
  Length (packaging excluded) [mm] 585
  Width (packaging excluded) [mm] 630
  Height (packaging excluded) [mm] 1,020
  (packaging excluded) [kg] 70
Equipment, features and functions
Automatic defrosting
  Hot gas
Automatic dehumidification
  Non-stop dehumidification
  Electronic hygrostat
  Analogue hygrostat
  stages 1
Condensate tank monitoring
  Container available
  Shut-off when full
  Indicator container full
Room air filter
  Readily accessible
  Ionizer selectable
Operating hours counter
  Operating hours counter
  Power meter
  Non-marking full-rubber wheels
  Carry/transport handle(s)
  Plastic wheels
  Rubber-tyred metal wheels
  Swivel casters with parking brakes
  Adjustable bar handle
Condensate drain
  Hose connection possible
  Hose included in the scope of delivery
  Condensate pump
  Recommended hose size [mm] 12
Housing design
  Steel coated
  Stainless steel
  Metal plastic composite housing


 optional erhältlich

 nicht verfügbar


Alternative products


Operating manual for condensate pump kit TTK 800 (DE)

Operating manual for condensate pump kit TTK 800 (DE)

TRT-BA-PUMPENKIT_TTK800-HS-001-DE.pdf (1.0 MB)


The Trotec Group  |  Trade fair  |  Blog  |  Jobs  |  Contact  |  Imprint  |  Data privacy statement  |  Sitemap