Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450
  1. Products & Services
  2. Machines - HighPerformance
  3. Accessories for restoration work
  4. TilexPro

TilexPro – The tile lifting system for professionals

Tiles can be removed without destroying and reused after the reconstruction works – with the TilexPro

If there is a defect underneath the tiling or a core hole needs to be drilled, it so far was the rule that the concerned tile had to be destroyed and replaced upon completion of the restoration work.

The problem:

Rare tiles or older patterns, which can no longer be obtained or only at high expense.

The solution:

With TilexPro you can lift most tiles and reinsert them after completed restoration without damage!

The TilexPro system is characterized by practical details: Depending on the model, the system chamber can be adjusted to all common tile formats – square and rectangular – sized up to 30 cm or 50 cm.

TilexPro comes with carry handles of thermally non-conducting material – that way the heated chamber can be put aside from the respective tile without the need of wearing protective gloves to remove it.

The Trotec tile lifting system TilexPro is available in two different models:

TilexPro system 30
for tile formats sized up to 30 cm
Art. no. 6.100.000.050

TilexPro system 50
for tile formats sized up to 50 cm
Art. no. 6.100.000.052

Every TilexPro system consists of the system chamber and an optionally available hot air blower.

Further recommended accessories for using the system are a joint cutter and a combination device to remove the adhesive residues from tile and ground.

With the TilexPro system tiles can be detached from the ground in just a few steps:

First, the tile is bared by use of a joint cutter.

Then the system chamber is adjusted in size to match the tile to be removed, positioned and warmed up with the hot air blower.

After that, the tile can be detached from the ground in only a few steps and reinserted after completed restoration without risking damage.

A few practical benefits:

  • Ideal solution especially for valuable tiles or older, hard-to-replace patterns
  • Existing tiles can be lifted and reinserted after completed restoration without risking damage
  • Adjustable system chamber for square and rectangular tiles sized up to 30 cm or 50 cm
  • Carry handles made of thermally non-conductive material

Preserving tiles and saving costs –
no problem with the TilexPro!

Regarding accessories also put your trust in the advantages of a grand brand:

The patented TilexPro system is a durable and robust product "made in Germany"

Tile lifting system TilexPro 30

Fliesenaufnahme-System TilexPro 30 im Trotec Webshop zeigen

Fliesenaufnahme-System TilexPro 30

Keine kaputten Fliesen mehr bei Sanierungsarbeiten: Mit dem TilexPro können Sie Fliesen aufnehmen und nach der Sanierung wieder unbeschädigt einsetzen. Dieses Modell ist anpassbar für Fliesen bis 30cm Größe und verfügt darüber hinaus über Tragegriffe aus nicht wärmeleitendem Material.

107.10 € inkl. MwSt.
Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Technical data
General information
  Article number 6.100.000.050
Connector
  Number 1
  Diameter [mm] 45
Dimensions
  Length (packaging excluded) [mm] 320
  Width (packaging excluded) [mm] 320
  Height (packaging excluded) [mm] 250
Weight
  (packaging excluded) [kg] 4.4

 Serienausstattung

 optional erhältlich

 nicht verfügbar

Tile lifting system TilexPro 50

Fliesenaufnahme-System TilexPro 50 im Trotec Webshop zeigen

Fliesenaufnahme-System TilexPro 50

Zuerst wird die Fliese mit einem Fugenschneider freigelegt. Dann wird die Systemkammer des TilexPro angepasst, aufgesetzt und mit dem Heißluftgebläse aufgewärmt. Die Fliese kann dann zerstörungsfrei vom Boden gelöst werden und später wieder eingesetzt werden. Geeignet für Fliesen bis 50cm.

154.70 € inkl. MwSt.
Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Technical data
General information
  Article number 6.100.000.052
Connector
  Number 1
  Diameter [mm] 40
Dimensions
  Length (packaging excluded) [mm] 520
  Width (packaging excluded) [mm] 520
  Height (packaging excluded) [mm] 250
Weight
  (packaging excluded) [kg] 7.2

 Serienausstattung

 optional erhältlich

 nicht verfügbar

Accessories

Heißluftgebläse HyStream 3400 im Trotec Webshop zeigen

Heißluftgebläse HyStream 3400

Das neue Trotec Heißluftgebläse HyStream 3400 mit einer maximalen Leistung von 3400 Watt. Es kann bis zu 320 l/min Luft ausblasen, bei einem Luftdruck von 3000 Pa. Die maximal erreichbare Temperatur liegt bei 650 °C.

Sie sparen: 99.99 €

349.94 € 249.95 € inkl. MwSt.
Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Downloads

Operating manual – tile lifting system (INT)

Operating manual – tile lifting system (INT)

TRT-BA-TILEX-HS-002-INT.pdf (420 KB)

Herunterladen