CERAMIC FAN HEATER TFC 19 E
Home Comfort

Any questions?

We are happy to provide further information available.

Business: +49 2452 962 400
Industry: +49 2452 962 777
End-consumers: +49 2452 962 450
  1. Products & Services
  2. Machinery - HomeComfort
  3. Heating
  4. Ceramic fan heaters of the TFC series
  5. Ceramic fan heater TFC 19 E

CERAMIC FAN HEATER TFC 19 E

For feel-good temperatures on cold days – and from a device in elegant pillar design

As autumn approaches, the temperatures slowly decrease. During the night we can cuddle up under a warm duvet, but at breakfast the switched-off central heating system can hardly go unnoticed. It's cold! 

Lucky is the person who has made according provisions in form of a ceramic fan heater of the TFC series. With its modern PTC ceramic heating element the device radiates the welcome warmth evenly and yet at lightning speed.

The visually appealing TFC 19 E in its slim pillar design and matt black housing harmoniously integrates in the living environment. You may have to look twice to recognize it as a heater at all.

The elegant TFC 19 E heats living and office spaces, conservatories and even summerhouses quickly and quietly. Two selectable heating levels (1,200 W / 2,000 W) provide enough power to supply even larger spaces with the more than welcome instant heat blown in by the integrated fan. This process is further enhanced by the on-demand 70° oscillation function available in both heating levels. This pivoting mechanism succeeds in distributing the warm air in the room even more quickly and effectively.

Thermostat-controlled switch-on/off

Unvarying feel-good temperatures accomplished by just one turn of the hand

The room thermostat controls the desired room temperature fully automatically as soon as it is activated via the infinitely variable rotary switch. Upon reaching the desired temperature the fan heater is automatically switched off and the operating light goes out – until falling just below the set target temperature, then heating will resume. This brief drop below the target temperature can go completely unnoticed, the room even remains more or less the same temperature during this switch-off.

An all-round clean affair with no unpleasant odours

Zero-emission feel-good warmth allowing you to breathe freely

A few practical benefits:

  • Quick and agreeable warmth
  • Silent and compact ceramic fan heater
  • PTC ceramic heating element
  • 2 heating levels (1,200 W / 2,000 W)
  • Suitable for rooms sized up to 24 m² / 60 m³
  • On-demand 70° oscillation for a faster air distribution
  • Steplessly adjustable thermostat
  • Overheating protection 
  • Tilt protection switch integrated in the device
  • Suitable for allergy sufferers
  • Operation indicator light
  • Easy transport and operation
  • Secure footing
  • Energy-efficient
SGS-tested quality

The TFC 19 E is supplied in SGS-tested quality, thus guaranteeing high value, safety and functionality and making sure that you are always on the safe side with Trotec brand quality.

Allergies have become the most common illness in our modern society. More and more people are suffering the consequences of polluted room and breathing air. Therefore, it should be protected from further contaminations in the best possible way – naturally, this is also true during the application of an electric heater. PTC ceramic heating elements have once key advantage over fan heaters with heating wire: The ceramic heating elements do not become hot enough to burn house dust, animal hair or insects. Consequently, there will be no disagreeable smells of burning, the room air remains perceptibly clean allowing allergy sufferers to breathe freely.

Safety first!

For that sense of safety

The stable base of the heater TFC 19 E in pillar design provides secure footing for every residential situation. Should the fan heater at some point be close to toppling over, the integrated tilt protection immediately switches the device off. The package of safety devices is completed by an intelligent overheating protection. Stop worrying about burnt heating wires which in case of conventional electric heaters used in continuous operation quite often lead to a complete device failure. If overheating is imminent, the TFC 19 E deactivates the ceramic heating element. Better safe than sorry.

Mobile heat generation for every room

Immediately ready for use and right at home wherever it goes

The TFC 19 E is ready for use from the get-go. Just unpack it and plug it in. That's all it takes for agreeable warmth to be spread in the room like wildfire. And if you don't want to say goodbye to this soothing warmth, you can just take the ceramic heater with you. A recessed transport handle simplifies site changes of the already light and compact device.

The tower-type ceramic fan heater TFC 19 E impresses with practice-oriented details:

Easy to handle: The TFC 19 E comes equipped with a steplessly adjustable thermostat and 2 heating levels (1,200 W / 2,000 W).
TFC 19 E – control panel
The convenient carrying handle permits an easy transportation of the fan heater tower TFC 19 E to any desired operating site.
TFC 19 E – convenient carrying handle
Extra safety: To be on the safe side, the TFC 19 E will switch off automatically if knocked over accidentally.
TFC 19 E – automatic switch-off
The TFC 19 E comes with an on-demand oscillation function. This means that the housing rotates vertically by 70° so that the hot air can be distributed in the room more easily
TFC 19 E – automatic oscillation

Faster air heating – more agreeable feel-good climate

Faster and more even heat with ceramic fan heaters

Compared to the conventional heating coil technology (B) the shorter heat-up times are not the only distinguishing feature of Trotec fan heaters with PTC ceramic heating elements (A). There are also substantial process-related differences in the response behaviour of the heating elements.

Although both devices maintain the preselected target temperature (orange) in a similar manner by means of thermostat control, the respective temperature adaptation takes place at a significantly reduced speed and with greater deviations from the desired target temperature in case of devices with heating wires. The reason for this is the different conductivity behaviour of the heating elements: if current flows through the heating coils or wires, they will always retain the same temperature once they have heated up. For controlling the desired room temperature, the power supply is first interrupted, causing the coil/wire to cool down, and then re-activated by the thermostat so that the coil/wire heats up again completely before it is switched back off upon reaching the set target temperature.

This "on/off process" causes greater temperature fluctuations than with ceramic heating elements, for the material of the latter provides an integrated temperature self-regulation. The hotter PTCs get, the higher is their electrical resistivity, resulting in less current flowing through the heating element and in a reduced heating capacity, and thus in significantly lower temperature fluctuations and less switch-on and switch-off processes in thermostat-controlled operation. For this reason, ceramic fan heaters are able to create more even room temperatures for a pleasant indoor climate.

Cosy warmth wherever it is needed ...

Warmth and comfort – but in style. The ceramic fan heater TFC 19 E impresses with timeless design and harmoniously integrates into your office or living environment.
TFC 19 E – warmth and comfort, but in style
Safe heating. Modern protection measures such as the tilt protection of the TFC 19 E serve to protect both your home and its inhabitants.
TFC 19 E – safe heating
The TFC 19 E is ideally suited for the quick additional heating of, say, holiday homes or conservatories. There is hardly any lead time required!
TFC 19 E – quick heat generation in holiday homes
Cold days outside the heating period are suddenly less daunting with a TFC 19 E heating device on hand. The device generates feel-good temperatures in a minimum of time.
TFC 19 E – to face sudden weather changes

Buy

Keramik-Heizlüfter TFC 19 E im Trotec Webshop zeigen

Keramik-Heizlüfter TFC 19 E

Der Keramik-Heizlüfter TFC 19 E verfügt über eine maximale Heizleistung von 2.000 Watt bei 2 Heizstufen.

Sie sparen: 41 %

59.94 € 34.95 € inkl. MwSt.
Nettopreis exkl. MwSt. anzeigen

jetzt kaufen

Details

Technical data
General information
  Article number 1.410.000.661
Heating capacity
  Stage 1 [kW] 1.2
  Stage 2 [kW] 2
Operating range
  Min. temperature [°C] -5
  Max. temperature [°C] 25
Electrical values
  Mains connection 220 - 240 V/50 Hz
  Nominal current consumption [A] 8.7
  Recommended fusing [A] 10
  Power input [kW] 2
Electric connection
  Connection plug CEE 7/17 (shaped plug)
  Cable length [m] 1.5
Sound values
  Distance 1 m [dB(A)] 54
Safety feature
  Overheating protection
  Internal oscillation (°) 70°
Dimensions
  Length (packaging excluded) [mm] 186
  Width (packaging excluded) [mm] 186
  Height (packaging excluded) [mm] 440
Weight
  (packaging excluded) [kg] 2
Equipment, features and functions
Operation
  Steplessly adjustable thermostat
  Operating control lamp
  Tilt protection switch
  Automatic switch-off upon reaching the set value
Mobility
  Carry/transport handle(s)

 Serienausstattung

 optional erhältlich

 nicht verfügbar

Accessories

Alternative products

Downloads

ErP table fan heater TFC 19 E (DE)

ErP table fan heater TFC 19 E (DE)

TFC_19_E_Tabelle_2_Erforderliche-Angaben_EU_2015_1... (1.0 MB)

Herunterladen

ErP table fan heater TFC 19 E (INT)

ErP table fan heater TFC 19 E (INT)

TFC_19_E_Table_2_Commission-regulation_EU_2015_118... (1.0 MB)

Herunterladen